Data Interrogator

Based on the Servo Skull tool from Darktide.

This servo skull was based on the Data Interrogator tool from Warhammer 40k Darktide.

The base was a small Halloween skul. I removed the jaw, and freehanded all the little bits of attatchments. The lenses in the eyes, the plating, etc. The tubes in the side were foam dowels.

The spider claws were originally made with EVA foam, but that made the too bulk and flimsy. I swapped these out for popsicle sticks and wood dowels.

At this time I also cut out an access hole at the base of the skull for LEDs and an enclosure to hold the battery pack.

Primed for paint.

The skull and mechanical bits were then all hand painted. Skull used various shades of browns and tans. And all metalic parts used a metalic gun metal paint.

Check out the full in-depth build video.